• Temperature sensor
  • Relay
  • Shore electricity sensor
  • Image capture sensor (Coming soon)
  • Mobile application
  • WEB App
  • Water sensor
  • Battery sensor
  • Presence sensor
  • Tracking
  • Geo-Fence
  • Wireless

Wireless sensor system DOKENVAN

DOKENVAN constantly monitors the status of your motorhome, ensuring its safety and your peace of mind, and instantly alerts you of any possible incident.

Also, whenever you want, you can check your mobile phone app or in Internet all the updated information about your motorhome that DOKENVAN is currently processing.

DOKENVAN is a wireless sensor system comprising a central module (CORE) and a series of sensors distributed around your motorhome.

  • With DOKENVAN you can know the voltage of the batteries, measure the temperature in different areas, monitor the presence of gas or smoke, detect movement in the interior and know that the current arrives without problems to the interior.
  • DOKENVAN will control through a CORE module up to 16 different sensors on your motorhome, and the sensor system can be extended/reduced very easily.
  • DOKENVAN will send you an alarm signal when something goes wrong so you are assured that your motorhome is fine.
  • You will control all your motorhomes from a single application, knowing their states at a glance.

Most important features

These are the most important features offered by DOKENVAN.

Status of your motorhome

Thanks to DOKENVAN and its sensors you can know the status of your motorhome.

Alert management

Decide who you want the alerts to reach, you can establish up to three contacts.

Tracking

You can know the position of your motorhome at all times, even the routes you have made in the last month

Geo-Fence

Set the perimeter of your parking zone

Multidevice management applications

You can check the status of your motorhome from any device.

Dokies

With Dokies, motorhome alarms are treated as warnings.

Wireless

More simple, wireless, no installation.

Telephone technical support

Contact us by phone, for greater efficiency.


Where to put them?

Select a sensor from the list below and see indicated its possible location in the motorhome.

CORE

It is the heart of the system. It collects information regarding the position of the motorhome and the sensors located on it.

It also manages the alarms of the sensors, and sends the information.

Battery voltage sensor

This sensor is connected directly to the motorhome batteries and sends the information of the voltage. If the voltage is out of the range set by the user, an alarm will be sent.

Current sensor

This sensor is connected to the 220V electricity input of the motorhome. If the power supply fails, an alarm will be sent.

Temperature sensor

This sensor sends the temperature information. If the temperature outside the range set by the user, an alarm will be sent.

Relay

You can control the activation of devices on your motorhome.

Water sensor

This sensor controls whether water is detected in an area of the motorhome, emitting an alarm signal when water is detected in it.

Presence sensor

This sensor detects any presence inside sending an alarm if movement is detected inside the motorhome.

Gallery

CORE

CORE

Shore electricity sensor

Sensor corriente pantalán

Presence sensor

Presence sensor

Water sensor

Water sensor

Battery sensor

Battery sensor

Dokie

Dokie

Temperature sensor

Temperature sensor

Relay

Relay

Sider

Sider

 

Services DOKENVAN (See service zones)

List of services included.

  • Smartphone App
  • WEB App
  • App Alert
  • Mail Alert
  • SMS Alert
  • Phone call Alert
  • Several user Alerts (up to 3 users).
  • Dokies
  • GPS positioning
  • Last month positioning records
  • Sensor battery status
  • Sensor status
  • Mail Technical support
  • Telephone technical support
  • Geofence
  • Communication 2G
 

Frequent questions

Any doubts?, we can help you.

The full pack contains the central or CORE module (DKC) that It is including international SIM card and GPS, temperature sensor (DKT), battery sensor (DKB), 220V shore electricity sensor (DKC) and presence sensor (DKP). It also includes standard subscription for the first year, so that you only have to put them in your motorhome.

Soon you will have the smoke (DKH), butane/propane gas (DKG1/DKG2) and image capture (DKI) sensors.

All sensors DOKENVAN system operate wirelessly, without wiring or communication or power. Our sensors are equipped with internal batteries that gives them more than 2 years of autonomy. The CORE is connected to 12/24 V and has an internal emergency battery in case of power failure.

DOKENVAN limits the number of sensors linked to a core module 16 units. The maximum distance between the CORE module and the sensors should not exceed 25 meters, the distance can be reduced depending on the thickness and number of barriers.

Both the mobile application and the desktop version allow the management and display of as many devices as you have associated with your account.

When working with GPRS Multi Operator technology, DOKENVAN has a coverage of almost 100%. Still, if your computer does not have connectivity, tell us where it is, and we will refund the amount.

Dokies are devices associated with the CORE module that allow the issuance of 'warnings' instead of 'alarms'. In this way, you can know that someone you know has entered, but it is not considered an alert.

A DOKIE is included with the purchase of a PACK. Additionally, as many as desired can be added.

An email will be sent to the specified email addresses, and a PUSH notification on the mobile terminals where the application is installed. In case of not accessing the app to see the problem will send an SMS to a total of up to 3 contacts provided. If you still do not cancel the warning, the system will notify you by telephone of the telephone numbers provided.

In each shipment of information, reports the battery status of the sensors and the CORE module. The battery level is visible in both the mobile application and the Web application, the CORE battery recharges automatically when connected to 12/24 V.

Once inside, the alarms will be deactivated, but not the sending of information whenever we are in the coverage area. This information will continue to be registered in the DOKENVAN system and may be viewed by third parties from the web or the mobile app.

Our partners